Freewing Moray Red(Orange) Racer 4S PNP Version RC Airplane
Freewing Moray Red(Orange) Racer 4S PNP Version RC Airplane
1, 3040-1400KV brushless outrunner motor was insatlled
2, it Required 4 channel transmitter and receiver
3,it Required 4S Li-Po Battery Balance Charger
Note:
If your shipment is delivered to a remote area,this charge will be added to your shipping cost.Checking your area is a remote area or is not a remote area on the website:http://remoteareas.dhl.com/jsp/first.jsp
Freewing Moray in Orange Color Scheme - Receiver Ready - FS10221P. In addition to all the carbon, the servo push rods are very well constructed. The Freewing Moray is a rocket fast, very well built, extremely fun to fly RC plane. Make sure you fly at a very large flight field because the Freewing Moray covers a lot of ground quickly.
Freewing Moray in Orange Color Scheme - Receiver Ready - FS10221P. The Freewing Moray is a rocket fast, very well built, extremely fun to fly RC plane. Make sure you fly at a very large flight field because the Freewing Moray covers a lot of ground quickly. Best of all the Moray requires no glue and can be built in about 30 minutes - just add your receiver of choice and a battery!
FEATURES:
| Feature: |
|
INCLUDES:
- Freewing Moray Red(Orange) Racer 4S PNP Version RC airplane(PNP Version)
- Motor, ESC, servos and retracts were installed
REQUIRES:
- 4 Channel Radio - Select a minimum 4 channel radio
- 4 Channel Receiver - Select a minimum 4 channel receiver
- 4 Cell 14.8V 1500-1600mAh 35C Battery
- 4 Cell Compatible Battery Charger - Select a minimum 4 cell (4S) charger
| Wingspan | 800mm (31.5 inch) |
| Length | 670mm (26.4 inch) |
| Flying Weight | 610g (21.5 oz) |
| Drive System | 3040-1400KV brushless outrunner motor |
| Speed Controller | 40amp brushless ESC |
| Servo | 2X 9g high speed micro servos |
| Battery | 14.8V 4S 1600mAh 25C Li-Po |
| Control System | 2.4GHz multifunctional transmitter and receiver |
| Radio Control Range | 3000 feet (1000m) |
| Pilots using their own radio systems will need to adjust Travel Adjust and or EPA (End Point Adjustment) settings before operating | |
